Grind Stump Removal: Rent a Grinder or Hire a Vancouver Pro
For grind stump removal , you have two workable routes: rent a stump grinder and do it yourself, or hire a local pro. Both follow the same four steps. Measure the stump and call 811, grind it 6 to 12 inches below grade and chase the surface roots, then backfill and finish the hole. A pro costs $120 to $380 per stump at Alexa's Tree Service in Vancouver, WA. A rental costs a day rate plus fuel, gear, and a hard afternoon.
A leftover stump is more than an eyesore. It trips people, dulls mower blades, shelters ants and rodents, and sends up sprouts for years. Digging one out by hand takes a weekend and still leaves roots behind, and wet Pacific Northwest soil makes the hole messy. Most people end up bouncing between rental pages, price lists, and videos.
This guide puts it all in one place. You will see how grinding compares with other methods, how to prepare the site, how to run a rented grinder safely, how to find who does stump grinding near you and read a quote, and how to finish the ground. We have worked on trees around Vancouver and Portland since 2006.
Why grind a stump and who should do it
Grinding is the best default for removing a stump. Whether you rent or hire depends on how many stumps you have and how tight your yard is.
Why grinding beats the alternatives
A grinder shreds the stump and its major roots into chips below ground level in 30 minutes to 3 hours , depending on size and wood. Chemical stump killers only speed up rot, so you wait weeks or months and still have a stump to dig out or burn. Burning is limited by local fire rules and can smolder for hours. Hand digging or winching leaves a large hole and a torn-up lawn .
Grinding also keeps chemicals out of your soil. That is why we grind stumps after tree removal and do not use chemical stump killers.
Grinding is the one method that clears a stump in a single visit and leaves almost no hole.
DIY rental or pro: the real tradeoffs
Rent a grinder when you have several stumps, open access, and the strength to steer a heavy machine. Hire a pro when you have one or two stumps, a big hardwood, or a gate that a rental machine cannot pass. Call a rental counter for the day rate and ask a pro for a quote, then compare the two numbers before you decide.
| Rent a grinder | Hire a pro | |
|---|---|---|
| Cost | Day rate, fuel, and safety gear | $120–$380 per stump at Alexa's Tree Service |
| Time | Pickup, setup, grinding, return | 30 minutes (small softwood) to 2–3 hours (large hardwood) |
| Effort | You haul, steer, rake, and backfill | None on your side |
| Cleanup | Yours | Cleanup and backfill included in our quotes |
| Best for | Several stumps, open yard | One or two stumps, tight access, big hardwoods |
Step 1. Measure the stump and mark utilities
Measure the stump, call 811, and clear the area before any machine starts. This step takes about an hour and prevents the most expensive mistakes.
Measure and photograph the stump
Measure the diameter across the widest point of the top. Note the wood type, since a softwood like fir grinds faster than oak or maple. Check for surface roots , and measure the distance to fences, the house, and your driveway. Measure your narrowest gate too. Rental listings state machine width, and a walk-behind grinder will not pass a gate that is too narrow.
These notes are also what a pro needs to give you an accurate quote over the phone.
Call 811 and clear the site
Call 811 a few business days before you dig. The call is free, and utility companies mark buried lines. They do not mark private lines such as irrigation, low-voltage landscape lighting, or a cable you ran yourself, so walk the area and look for sprinkler heads and wire runs.
Then clear rocks, nails, and fence wire from the stump and the soil around it. Hidden metal chips teeth and throws debris. Cut the stump as low as you safely can with a chainsaw, because every inch you remove is an inch you do not have to grind.
Call 811 first, because a grinder cuts deep enough to hit shallow lines you cannot see.
Step 2. Rent a grinder and cut the stump out
Rent a walk-behind grinder rated for your stump's diameter, wear full protection, and grind in slow side-to-side passes down to 6 to 12 inches below grade.
Pick the machine and the gear
For most home stumps, a self-propelled walk-behind grinder from a rental counter is the right size. Ask which stump diameter it is rated for, and ask for a quick demo of the controls and kill switch. Also ask whether the rental includes a damage waiver.
Wear eye or face protection, hearing protection, steel-toe boots, long pants, and gloves . Skip loose clothing. Keep kids, pets, and bystanders well back. Rental manuals commonly say at least 25 feet, so follow the one that comes with your machine.
Grind in passes
Work through it in this order:
- Fuel the machine, check the cutter teeth, and set bystanders back.
- Position the cutter wheel just above one edge of the stump, and start it spinning before it touches wood.
- Sweep the wheel slowly side to side across the stump.
- Advance an inch or two after each sweep, and lower the wheel a little at the end of each pass.
- Repeat until you are 6 to 12 inches below grade .
- Chase the surface roots out 2 to 3 feet from the stump center.
- Shut the engine off and wait for the wheel to stop completely before you step close.
Expect about 30 minutes for a small softwood stump and 2 to 3 hours for a large hardwood. If the engine bogs down, back off and let the wheel do the work.
Let the cutter wheel do the work, and sweep slowly instead of pushing.
Step 3. Hire a pro for stump grinding near you
Hire a licensed and insured tree service, get a written quote that names depth, root work, and cleanup, and compare at least two offers.
Who does stump grinding near you
Tree services and arborists are the most reliable choice. They own larger machines and handle stumps after removals every week. Landscapers and handymen sometimes offer grinding too, but ask what machine they use. Search the map for tree services in your town, read the recent reviews, and ask neighbors who have had trees taken down.
- Do you carry liability insurance, and can you show proof?
- How deep do you grind, and do you chase surface roots?
- Are cleanup and backfill included, or extra?
- Is there a surcharge for surface roots or hard-to-reach stumps?
- Do you discount multiple stumps or bundle with tree removal?
We serve Vancouver, Camas, Battle Ground, Ridgefield, Portland, Gresham, Beaverton, and Lake Oswego. Call (360) 723-6688 for a free estimate.
How to read a quote
Our stump grinding runs $120 to $380 per stump in Vancouver, WA, based on size. Cleanup and backfill are included in every quote. Here is how the add-ons stack up:
| Item | Alexa's Tree Service price |
|---|---|
| 24-inch stump | About $180 |
| 48-inch stump | About $340 |
| Surface roots | Add $45–$90 |
| Multiple stumps | 15% volume discount |
| Bundled with tree removal | Saves $45–$75 versus separate visits |
For example, one 24-inch stump with surface roots comes to roughly $225 to $270 ($180 plus $45 to $90). Two 24-inch stumps, one with surface roots, comes to about $351 to $396. That is $360 less the 15% discount ($306), plus the $45 to $90 root surcharge. Your final price is confirmed at the on-site inspection.
A good stump quote names the depth, the root work, and the cleanup in writing.
Step 4. Fill the hole and finish the site
Rake out most of the chips, fill the hole with topsoil, mound it slightly, and top it up after the first heavy rain.
Backfill and let it settle
A fresh grind leaves a mound of chips and a shallow pit. Rake out most of the chips and keep them for mulch around trees and beds. Fill the pit with topsoil and tamp it lightly. Mound it an inch or two above the surrounding lawn, because the soil sinks as buried wood fibers compress. Fresh chips buried deep tie up nitrogen as they break down, which can starve new grass, so mix in topsoil instead of burying a thick layer of chips.
If you hired a pro whose quote includes backfill, check the spot after the first heavy rain and add soil if it sank.
Replant and watch for sprouts
For a lawn, rake the soil level, scatter seed, and keep it moist. If you plan another tree, plant it a few feet from the old spot or swap the soil in the hole for fresh topsoil. Some species send up shoots from leftover roots, so clip any sprouts as soon as you see them. A few months of clipping usually exhausts what is left.
Remove most chips, mound the soil slightly, and top it up after the first heavy rain.
Pick your route and get it done
Grinding is the fastest clean way to remove a stump. Rent a machine if you have several stumps and a clear yard. Otherwise hire a licensed, insured pro and get the depth, roots, and cleanup in writing. Either way, call 811, grind 6 to 12 inches down, and backfill so the ground settles flat.
If you would rather skip the rental and the sore back, request a free stump grinding estimate from Alexa's Tree Service and we will give you a free, no-obligation estimate.

